purchase grinding dust collector refers to the method of blowing compressed air to remove the dust attached to the filter medium (cloth bag or filter cartridge); According to the size of the dust collector may have several groups of pulse valves, controlled by the pulse controller or PLC, each time open a set of pulse valves to remove the dust of the part of the bag or filter cartridge controlled by it, while other bags or filter cartridging work normally, after a period of time, the next set of pulse valves open, clean the next part of the dust collector by the ash bucket, the upper box, the middle box, the lower box and other parts. The upper, middle and lower boxes are divided into chambers. When working, the dust-containing gas enters the ash hopper from the inlet air duct, the coarse dust particles directly fall into the bottom of the ash hopper, the fine dust particles enter the middle and lower box with the airflow turning point, the dust accumulation is attached to the outer surface of the filter bag, the filtered gas enters the upper box to the clean gas collection tube - exhaust air duct, and is discharged to the atmosphere by the exhaust fan.

How can I prevent accidents in the purchase grinding dust collector? The following points need to be done:

First, carefully do a good job of planned maintenance, improve the quality of maintenance, carefully develop annual and monthly repair plans, but also serious maintenance, maintenance quality.

Second, do a good job of daily spot inspection, maintenance, fastening and other work. Do a good job of daily spot inspection before, after and during operation, clean and wipe the equipment regularly, keep the equipment clean, and deal with the hidden defects of the equipment in time to ensure that the equipment is in good technical condition.

Third, according to the consumption law, prepare all kinds of spare parts of the dust removal equipment. In order to reduce the emergency repair time of equipment accidents, spare parts should be prepared for common parts and replacement parts according to the consumption quota, spare parts should be prepared for critical parts, and parts that have many accidents and are difficult to repair should be replaced in groups as far as possible.

Fourth, the operator training qualified after the job, constantly improve the technical quality of the operator, personnel to care for the equipment, practice and continue to improve the level of operation, to prevent the equipment due to wrong operation caused by early deterioration or accidents.

Five, according to the time of refueling grease, maintain the good lubrication state of the equipment, all lubrication parts, should be on time, quantitative oil or oil change, the equipment is in a good lubrication state, to prevent poor lubrication caused by equipment damage in advance.

6. Conduct pre-accident drills to make equipment accident plans and improve the staff's response capacity to deal with accidents.

Seven, increase the regular inspection work of the equipment, the inspection personnel should plan, seriously implement the inspection work, the equipment defects and hidden dangers are eliminated before the failure occurs, and the problems in the structure of the dust removal equipment itself should be solved.

Maintenance of the purchase grinding dust collector can ensure the normal operation of the device and reduce the fault incidence. Any machine will be damaged after a period of use, and regular maintenance can always detect the operation of the equipment, reduce the possibility of failure, and also allow it to have a state of work. In addition, the maintenance of the purchase grinding dust collector can make the surface of the machine as bright as new and maintain its ornamental value.

purchase grinding dust collector https://www.kaisenfilter.com/KSZHDM-01-Combined-Grinding-Dust-Collector.html