Bending Machine Free Sample Introduction The Hydraulic Square Tube Bender Machine bends pipes and tubes into curved-shaped portions. Pipe sealing, pipe bending, pipe assembling, and pipe breaking are just a few of the applications for this equipment. Both interior and exterior diameters can be bent with a tube bender machine. A tube bending machine is far more efficient than a traditional bending machine for forming pipes. If you are interested in this hydraulic square tube bender machine, please feel free to contact us for more information. It also has various advantages over bending machines, including the capacity to work at higher speeds, the use of less manual labor, the use of common industrial parts, and material cost savings. The hydraulic Square Tube Bender Machine is most commonly used for pipeline construction and repair. The machine is usually put into the mainline for this purpose. The pipe is then completely round-arched to give it a cylindrical shape. This also allows for the construction of complementary profiles to the pipe's exterior curve. Furthermore, it generates profiles that aren't parallel to the pipeline. Item No.HR201803HR201804HR201805 ModelUB-70UB-100UB-100A Capacity(mm) Flat steelWarm70脳15Warm100脳15Warm100脳15 Round steelWarm18/30Warm18/30Warm22/27 Square steel16脳16/30脳3016脳16/30脳3020脳230/25脳25 Angle steel60脳8/70脳1560脳8/100脳12 Packing size锛坈m锛?/p>Body:39脳29脳28Body:39脳29脳28 55 脳32脳24 Handle:72脳18脳13(20pcs)Handle:72脳18脳13(20pcs) N.W./G.W锛坘g锛?/p>28/2928/2931/3234/36Bending Machine Free Sample website:http://www.tzhrmachine.com/bending-machine/