A little wireless range extender, the Linksys RE3000W setup is intended to increase the strength and coverage of your current Wi-Fi network. 

• There are only a few simple steps involved in setting it up. 

• To get started, connect the extender to a power outlet that is close to your current Wi-Fi network. Hold off until the extender's power light stabilizes. 

• Next, connect to the "Linksys Extender Setup" network that shows up in the list of accessible networks on your device using a computer, smartphone, or tablet.

• To access the setup interface after connecting, use a web browser and enter "http://extender.linksys.com" in the address bar. 

• To choose your current Wi-Fi network and input its password, adhere to the on-screen directions. 

• This procedure guarantees that the network signal can be smoothly relayed by the extender. Following a successful configuration, the extender will reboot and display a solid green status light, signifying a robust router connection.

•  If required, move the extender so that it is positioned halfway between the router and the spot with the weak Wi-Fi signal in order to optimize coverage.

• Connect your devices to the Wi-Fi network to test the signal in the enlarged region. 

• Usually, the extender will utilize the SSID of your router, followed by a suffix such as "_EXT." Make sure the connection has better speed and is steady.

•  Repeat the setup procedure after ten seconds of pushing the reset button to reset the extender if you continue to experience problems. 

• You may benefit from increased Wi-Fi coverage, fewer dead spots, and better connection in your house or place of business when the Linksys RE3000W is set up correctly.

Go to our website to know more.