A reset will return everything to its original settings if your connection is experiencing issues or if you want to change the camera's settings. The procedure is easy to follow and guarantees that your device is prepared for Zmodo app setup once more.

The Zmodo camera reset:

1. Turn the Camera On: Verify that the Zmodo camera is turned on and connected in.

2. Find Its Reset Button: The majority of Zmodo cameras feature a reset button, which is often a tiny pinhole on the bottom or rear of the camera.

3. Pressing and Holding the Reset Button: Hold down the button for 10 to 15 seconds using a paperclip or pin. The process will now commence when the LED indication on the camera starts to blink.

4. Await Reboot: Release the hold once it begins to flash. The camera would then restart and return to its original factory settings.

5. Reconnect from Zmodo App: To reconnect the device to the network, launch the Zmodo app and login Zmodo again. 

Why You May Need to Reset:

·         Lost Wi-Fi connection

·         Moving the camera to a new location

·         Forgotten password

·         Camera not functioning as expected

Practice applying the latest Zmodo firmware update after a reset for best device performance and security.

Final Tip:

After successfully resetting the Zmodo camera, make sure to reconfigure all settings, motion detection alerts, and cloud storage preferences, if applicable.

Knowing how to reset Zmodo camera is very handy in ensuring user friendliness and line of troubleshooting or interview with an issue. Remember your Zmodo login credentials and keep that firmware updated for best performance.