Comparators Amplifier in stock Features 鈼廢ltra-Low Supply Current: 390 nA Comparator with Reference 鈼廔nternal 1.248V 卤1.4% Reference 鈼廎ast Response Time: 13 渭s Propagation Delay, with 100 mV Overdrive 鈼廔nternal Hysteresis for Clean Switching 鈼廜ffset Voltage: 卤2.0 mV Maximum 鈼廜ffset Voltage Temperature Drift: 0.3 渭V/掳C 鈼廔nput Bias Current: 6 pA Typical 鈼廔nput Common-Mode Range Extends 200 mV 鈼廝ush-Pull Output with 卤25 mA Drive Capability 鈼廜pen-Drain Output Version Available: TP2025 鈼廚o Phase Reversal for Overdriven Inputs 鈼廘ow Supply Voltage: 1.8V to 5.5V 鈼廏reen, Space-Saving SC70/SOT23 Package Applications 鈼廈attery Monitoring / Management 鈼廇larm and Monitoring Circuits 鈼廡hreshold Detectors/Discriminators 鈼廠ensing at Ground or Supply Line 鈼廜scillators and RC Timers 鈼廙obile Communications and Notebooks 鈼廢ltra-Low-Power Systems Description The TP2021 has a push-pull output stage with loads up to 25mA. The TP2025 has an open-drain output stage that makes it suitable for mixed-voltage system design. Both feature an on-chip 1.248V 卤1.4% reference and draw an ultra-low supply current of only 440nA (max). The TP202x incorporate 3PEAK鈥檚 proprietary and patented design techniques to achieve the best world-class performance among all nano-power comparators. Both have 13渭s fast response time under 1.8V to 5.5V supply. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. They have input common-mode range 200mV beyond the supply rails, and operate down to +1.8V. The integrated 1.248V voltage reference offers low 120ppm/掳C drift, is stable with up to 10nF capacitive load, and can provide up to 25mA of output current. These features make the TP202x ideal for all 2-Cell Battery Monitoring/Management. The TP202x is available in the tiny SC70/SOT23 package for space-conservative designs. Both versions are specified for the temperature range of 鈥?0掳C to +85掳C.Comparators Amplifier in stock website:http://www.misuxin-en.com/amplifier/comparators-amplifier/